How Do I Get CrossTec To Browse Across Multiple Subnets

This document ("TD65") is provided subject to the disclaimer at the end of this document.

This Document is available in these languages

Forward this document to a colleague.   Provide feedback about this document to the CrossTec Technical Support.

Summary If you are running CrossTec across multiple TCP/IP Subnets; you need to configure CrossTec to use the additional subnets when performing a browse of the Network. Details When adding a subnet you can either add a broadcast address or a range of addresses. To calculate your broadcast address Click Here Adding a range of Addresses is particularly useful if the subnet is behind a router that has UDP broadcasts disabled. This would normally prevent the Control from finding the required Clients but by specifying the required IP address range a broadcast packet will be sent to each machine. (Only Class C address ranges can be entered) Example 194.150.160.1 - 254 To Change the browsing setting For CrossTec Remote Control 1) In the control choose {Network} {Configure} 2) Choose the Connectivity\TCP/IP Settings  3) In the Browsing section click on the [Settings] Button 4) In the "Configure TCP/IP Client Browsing" Dialog choose the [Add..] button. 5) Add your local subnet's broadcast address ( e.g. 10.0.0.255 ) 6) Add the either the broadcast address of the network or a range of IP addresses that you wish to browse across. For CrossTec SchoolVue 1) In the Tutor choose {School} {Configuration} 2) Choose the Connectivity Settings 3) In the Browsing section click on the [Settings] Button 4) In the "Configure TCP/IP Client Browsing" Dialog choose the [Add..] button. 5) Add your local subnet's broadcast address ( e.g. 10.0.0.255 ) 6) Add the either the broadcast address of the network or a range of IP addresses that you wish to browse across. Once you have finished adding the Subnets and clicked on OK, the control will re-initialise and you will then be able to browse over all of the subnets that you have chosen. **** NOTE: It is vital that you include your own Subnets broadcast address or you will no longer be able to browse across your own network. ****

If you require any further assistance please contact CrossTec Technical Support tech@crossteccorp.com

Did the information in this document help answer your question? Yes  No

DISCLAIMER: The origin of this document may be internal or external to CrossTec Corporation. CrossTec Corporation makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. CrossTec Corporation makes no explicit or implied claims to the validity of this information.

Any trademarks referenced in this document are the property of their respective owners.